Answer

To get the most stable overclock performance, follow steps below to get the proper system configuration.

1. Make sure the BIOS, EC firmware and the Dragon Center 2 is updated to the latest version

    (1) BIOS: version E17H1IMS.105 (or newer version)

    (2) EC firmware: version 17H1EMS1.101 (or newer version)

    (3) Dragon Center 2: version 2.5.1906.1401 (or newer version)

         *If the system is installed with an older Dragon Center 2 version, perform a clean installation of the new Dragon Center 

2.  Left-click on the battery icon and adjust the power mode to Best Performance

3.  Right-click on the battery icon and select Windows Mobility Center, adjust the battery status to High Performance

4.  Adjust Dragon Center 2 Turbo Mode & FAN Speed settings in System Tuner tab:

    (1) Select SHIFT to “Turbo” and open the setting page.

    (2) Set the same CPU ratio for all cores.

    (3) Set the FAN Speed to “Cooler Boost” to get the maximum heat dissipation.